All Shelly battery powered devices are on standby mode at all times. They have a secondary processor, that keeps track of sensors, battery and buttons. If any indicators change, it will wake up the main processor to transmit data via WiFi or Bluetooth.

The following devices support power consumption tracking: Shelly 1PM and Shelly Plus 1PM, Shelly 2.5, Shelly Pro series devices, Shelly EM, Shelly 3EM, Shelly Dimmer 2, Shelly RGBW2, Shelly Plug, Shelly Plus S, Shelly Plus US, Shelly Bulbs – Duo, RGBW, Vintage

In the aforementioned configuration, the most recommended devices would be Shelly 1 or Shelly Plus 1. Depending on the motor you might need two devices for both states of opened/closed.

Each battery powered device has it's battery life stated on the specifications page. Every device's battery life is measured from it's 'out of box' state. Connected devices might shorten or lengthen the battery life.

Yes, you can control your devices locally using the built-in web server (it's accessible by writing the device's IP address into your browser, whilst being connected to the same network) or through the MQTT Broker.

The maximum limit is set to 100 events. The events cannot be deleted and oldest instances will be deleted automatically when the spaces fill up.

Saved logs are dependent on the cloud connection. Ensure that the cloud is enabled in your app.

Check if you can contact the device via the IP address. If so, the problem is with the cloud connection. To fix this, please update/restart the Shelly app and enable cloud permissions from there. Alternatively, you can factory reset your device and start from scratch.

Make sure that both devices (Shelly device and phone/computer) are connected to the same WiFi network. Then type the device's provided IP address into your browser search bar.

Open the Shelly mobile app or visit the address control.shelly.cloud.Next open settingsand deviceinfo).

No, Shelly cloud is a free service and everyone can control and check their devices from anywhere, anytime.

Open settings in the Shelly Smart Control app and press on the pencil icon.

To view power or device usage history, the device has to first be connected to the cloud.

Under each device there's a section called: share. Each device can have up to 5 people assigned to it.

Open your web browser and visit the address https://control.shelly.cloud/. You can control your devices there.

You have to create a scene first to receive notifications about changes.

To create a scene, press the button in the upper right corner of the screen and select “Add Scene” from the drop-down menu. Enter the name of the scene and select the room where the scene is located. Then select a suitable image or upload an image from your device.
A scene is divided into 2 main parts:
1) "When"‎‎ – refers to the conditions that must be met to activate the scene. You can add conditions based on device type or time of day. Shelly Cloud can support many conditions that must be true to complete the scene. If you want to add a condition, you need to press the “AND” button.
2) "Do"‎- refers to the scene that should be activated when the “When” conditions occur.
For example: (When) If Shelly's motion sensor detects motion after 10:00 p.m. (Do) Shelly Dimmer turns the lights on at 50% dimming. If the performance of the scene depends on more than one factor, you can use the “OR” option.

Three condition types are used for different purposes - "One time", "Repeatedly" and "On any change".
– “One time” – when the preset condition is reached, the scene will be activated only once. The “WHEN” condition must be repeated to reactivate the scene. If you enter an additional time in the "Condition is valid" field, the scene will not start until the "WHEN" state has existed for at least that amount of time.
– “Repeatedly” – the status “WHEN” is continuously asked every full minute. And if the “WHEN” state is not changed, all set “DO” actions are also requested every minute.
– “On any change” – This condition is mainly used to monitor temperature or power consumption. If this condition type is selected as the X value, it will always activate the same scene if the preset conditions are met.
Example:
(WHEN) Shelly EM detects more than 15W, (DO) send a notification
In this case, every time Shelly EM detects energy consumption above 15 W (> 15 W), the scene is triggered and the device sends a notification to the application, thus also to the user.

Shelly Plug has a 16A relay, whereas Shelly Plug S has a 12A relay with a built-in temperature sensor, which controls the temperature of the PCB.

If the relay is turned on, <1 W

The devices can be controlled via HTTP Commands – https://shelly.cloud/documents/developers/ddd_communication.pdf or through app scenes.

We do not recommend using relays for the switching of air conditioner units.

Our sensors cannot be installed outdoors, because they don't have the appropriate dust/water protection for outdoor use.

If you want to power your H&T device using an external power source, you can do so by purchasing a MicroUSB dongle through our webstore.

Yes, the devices have an in-built storage where it records data incase of an internet outage. The data can be downloaded at any time in .csv format.

Battery voltage has to be exactly 3V. Using higher voltage batteries will damage the device.

Reset the device to factory settings and make sure that there are no other devices around you, that are allowed automatic connection to the Shelly network.

You can connect a maximum of 3 x DS18B20 temperature sensors or 1 x DHT22 sensor.

To begin, open your Alexa app and go to the skills tab. Then type “Shelly Cloud” in the search field, click on it and press “Enable skill”. If the Shelly Cloud Skill is enabled, you will be automatically redirected to https://home.shelly.cloud/ where you will need to login to your account. After logging in, use the voice assistant: “Alexa, search for new devices.” Your Amazon Alexa-enabled device will search for new Shelly devices.

You need to activate the Shelly Cloud Skill option in the app. After that, you will be automatically redirected to the “Login” page. Enter your Shelly Cloud account details. After that, your devices will be displayed.

The voice assistant recognizes the device only as a relay and cannot receive information from the sensors. This integration is only implemented in our Shelly Cloud app, but voice assistants like Google Home and Alexa do not support it.

Yes, thats possible through our DDD API - https://shelly.cloud/documents/developers/ddd_communication.pdf

Teval Elektroonika is a distributor and reseller of Shelly products in Estonia. The Shelly.ee webpage is directly related to Teval and Shelly's products can be purchased through Teval's webpage

The products are still available for order, but with a longer delivery time. If products are out of stock on Teval's webpage, it doesn't necessarily mean you can't still order them. If you find yourself in this situation, please contact our sales team at www.teval.ee/kontakt or by calling the number +372 6 562 948

The products are still available for order, but with a longer delivery time. Shelly.ee constantly receives new products and we are actively working at filling up our warehouses with Shelly product. If you find yourself in this situation, please contact our sales team at www.teval.ee/kontakt or by calling the number  +372 6 562 948

Products displayed as 'Out of stock' have a ~1 week delivery time. Exact time period will be specified after ordering. Products in stock will be delivered in Estonia within 2-3 workdays.